Tinytag Plus Radio
Rugged, industrial/outdoor radio four input current data logger with input leads
0 to 20mA (x4)
The TGRF-4844 monitors current from 0 to 20mA DC across four inputs and can be connected to a variety of sensors enabling the logging of a wide range of processes. The data logger is waterproof and suitable for outdoor, industrial and warehousing applications. This logger is a component part of the Tinytag Radio data logging system which operates using wireless connectivity. The system requires a receiver and Tinytag Explorer Radio software (ACSRF-4030-PK, ACSR-3030-PK). This unit is supplied with an input lead (CAB-3246). Alternatively you can buy our 2-pin connector plug (ACS-9700) to connect to your own sensor.
Please note: this product is only for sale in the EU and Australia.
Introduction to the Tinytag Radio System
The system is easy to set-up: it consists of a receiver connected to a computer or LAN and a number of radio loggers which self-configure to form a robust mesh network.
Radio loggers work together to send information to the receiver. They are able to receive, log, store and transmit data. If a logger is out of range and cannot send the data directly to the receiver, it will re-route it via other loggers. If a logger has lost all connections and is unable to find a way of sending the data to the receiver, it stores it locally until communications are restored. Alarm warnings can be sent via email or SMS enabling corrective action to be initiated.
- Supplied with input leads
- Robust data network
- Local recording
- Easy to install
- Remote alarm signalling
- 200m typical range (line of sight)
- High accuracy and reading resolution
- User-replaceable battery
- Low battery monitor
Contact Us >
Get in contact with us by email:
Alternatively you can call us on:
+44 (0) 1243 813000
Help & Support >
Technical support information including FAQs, manuals and documentation for this data logger.View more
Replacement Battery >
Battery and service kit for this product.View more