How do I check my data logger's battery status?
Different types of data logger have different low battery warnings. Some loggers display or indicate low battery status, while other loggers must be checked in Tinytag Explorer.
Support
The display on my logger is blank
The display on a Tinyview or Tinytag View 2 data logger will only show readings while the unit is recording. If your device has a blank screen, it may have stopped recording or the battery might need replacing.
If the display on a Tinyview or Tinytag View 2 data logger is blank, it means that the logger is not recording.
This will be because the unit hasn't been started or because it has stopped recording (due to the settings it has been programmed with or because it has a flat battery).
Data loggers have to be started using the Tinytag Explorer software.
If you suspect your data logger has a flat battery, you can check the battery status using the Current Reading feature in Tinytag Explorer. If the battery is good or getting low, Tinytag Explorer will confirm this; if the battery is flat, the logger will not connect to the computer.
If you require a replacement battery, you can purchase a service kit for your logger here: Battery service kits.
Still need help?
Similar questions
View answer
What do the LEDs on a data logger indicate?
Most Tinytag data loggers have one or more LEDs that indicate the status of the logger. In most cases, the LEDs indicate that the logger is waiting to record, recording or that an alarm is active.
Getting unexpected readings on a humidity logger
If your humidity logger is showing unusual or unexpected readings, it is likely that the sensor has come into contact with a liquid. Allowing the sensor to fully dry should allow the logger to read normally.
